S T 9 2 3 5 N G SEAGATE NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 2.5"/SLIMLINE Cylinders 985| | | Capacity form/unform 209/ MB Heads 13| | | Seek time / track 16.0/ 5.0 ms Sector/track 32| | | Controller SCSI1 SINGLE-ENDED Precompensation Cache/Buffer 64 KB Landing Zone Data transfer rate 4.000 MB/S int Bytes/Sector 512 5.000 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5 V Temperature *C 5 55 | -40 70 Power: sleep 0.2 W Humidity % | standby 0.2 W Altitude km | idle 0.1 W Shock g 10 | 150 seek 1.8 W Rotation RPM 3450 read/write 1.8 W Acoustic dBA spin-up W ECC Bit MTBF h 150000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** SEAGATE ST9235NG JUMPER SETTING +- 40-pin I/O Connector (* see below) TOP | | 1 +--------------------+ o o o o ----P-W-A-+:::::::::::.:::::::1+--* * * * +-----------+--------+ pin-17 removed for keying ----------------+ Pin assignments for the Seagate 2.5" drive SCSI interface connector (signal) (pin) (signal) +----------+ pin RESERVED (NC) | 1 2 | RESERVED (ND) ID1 ID2 ID4 RESERVED (NC) | 3 4 | RESERVED (ND) ID+----------- ID1- | 5 6 | ID2- 0 | H H H ID4- | 7 8 | LED 1 | L H H +----------+ 2 | H L H +----------+ 3 | L L H +5V | 1 2 | +5V 4 | H H L +5V Ret | 3 4 | +5V Ret 5 | L H L Ground | 5 6 | DB0- 6 | H L L Ground | 7 8 | DB1- 7 | L L L Ground | 9 10| DB2- Ground | 11 12| DB3- H = high Ground | 13 14| DB4- L = low Ground | 15 16| DB5- Connector Key | no pin 18| DB6- Ground | 19 20| DB7- Ground | 21 22| Parity- Ground | 23 24| TRMPWR ATN- | 25 26| BSY- Ground | 27 28| ACK- RST- | 29 30| MSG- Ground | 31 32| SEL- I/O- | 33 34| C/D- Ground | 35 36| REQ- +5V Ret | 37 38| +5V Ret +5V | 39 40| +5V +----------+